128 BPM in Milliseconds: Delay Times and Note Lengths

At 128 BPM one beat (a quarter note) lasts 468.75 ms and one bar of 4/4 lasts 1.875 seconds. Below are the delay times for every note value, the same notes in Hz, bar and phrase lengths, samples per beat and the genres that typically sit at this tempo.

128 BPM at a glance

  • One beat at 128 BPM lasts 468.75 ms (60,000 divided by 128), an eighth note about 234.38 ms and a dotted eighth about 351.56 ms.
  • A beat here is not a whole number of milliseconds. The nearest tempo where it is: 125 BPM, with 480 ms per beat.
  • At 48 kHz a beat is exactly 22,500 samples, while at 44.1 kHz it is 20,671.875 samples, so a loop cut on the beat lands on a whole sample only at 48 kHz.
  • A 4 bar phrase in 4/4 takes 7.5 seconds, and 3 minutes of music at this tempo holds 96 bars of 4/4.
  • Going from 128 to 129 BPM shortens each beat by 3.634 ms, about 0.78% of the beat.
  • An LFO synced to quarter notes runs at about 2.133 Hz; synced to whole bars of 4/4 it runs at about 0.5333 Hz.

Delay times at 128 BPM

Milliseconds for each note value. Dotted notes are 1.5 times as long, triplets 2/3 as long. Rounded to 2 decimals.

NoteStraightDottedTriplet
Whole note (1/1)1,875 ms2,812.5 ms1,250 ms
Half note (1/2)937.5 ms1,406.25 ms625 ms
Quarter note (1/4)468.75 ms703.13 ms312.5 ms
Eighth note (1/8)234.38 ms351.56 ms156.25 ms
Sixteenth note (1/16)117.19 ms175.78 ms78.13 ms
1/32 note58.59 ms87.89 ms39.06 ms
1/64 note29.3 ms43.95 ms19.53 ms

128 BPM in Hz for LFOs

The rate that repeats once per note, for an LFO, tremolo or auto pan synced to 128 BPM. Rounded to 3 decimals.

NoteStraightDottedTriplet
Whole note (1/1)0.533 Hz0.356 Hz0.8 Hz
Half note (1/2)1.067 Hz0.711 Hz1.6 Hz
Quarter note (1/4)2.133 Hz1.422 Hz3.2 Hz
Eighth note (1/8)4.267 Hz2.844 Hz6.4 Hz
Sixteenth note (1/16)8.533 Hz5.689 Hz12.8 Hz
1/32 note17.067 Hz11.378 Hz25.6 Hz
1/64 note34.133 Hz22.756 Hz51.2 Hz

Bar lengths at 128 BPM

1 bar of 4/41.875 s
2 bars of 4/43.75 s
4 bars of 4/47.5 s
8 bars of 4/415 s
16 bars of 4/430 s
32 bars of 4/460 s
1 bar of 3/41.406 s
1 bar of 6/81.406 s
1 bar of 7/81.641 s
1 bar of 5/42.344 s

Samples per beat at 128 BPM

RatePer beatPer 4/4 bar
44.1 kHz20,671.87582,687.5
48 kHz22,50090,000
96 kHz45,000180,000

Sample rate times 60, divided by 128.

What music is 128 BPM?

Dance tempo (120 to 139 BPM). This is the core dance music range. Steady four to the floor club music clusters here, and DJs often mix within a few BPM of it, so tracks at this tempo are easy to blend with each other.

Typical tempo ranges that include 128 BPM: Pop, Rock, Disco and nu disco, House, Techno, Trance.

Half time: 64 BPM, in the typical range of Ballads, Reggae, R&B. Double time: 256 BPM, faster than the genre ranges listed here.

A track can be written at one tempo and felt at the other, so a song at 128 BPM may be counted as 64 or 256 in a DAW or DJ software. Ranges are typical only; plenty of songs sit outside them.

Work at 128 BPM

The BPM and Delay Time Calculator does this math for any tempo, including decimals, with tap tempo and milliseconds back to BPM. All free, in your browser.

Nearby tempos

Questions about 128 BPM

How many milliseconds is a beat at 128 BPM?

A quarter note beat at 128 BPM lasts 468.75 ms, which is 60,000 divided by 128. An eighth note is about 234.38 ms and a sixteenth note is about 117.19 ms.

What delay time should I use at 128 BPM?

For a quarter note echo set 468.75 ms, for a dotted eighth set about 351.56 ms and for an eighth note triplet set 156.25 ms. If your delay has a tempo sync mode, picking the note value there gives the same timing.

How long is one bar at 128 BPM?

One bar of 4/4 at 128 BPM lasts 1.875 seconds, so 8 bars take 15 seconds and 16 bars take 30 seconds. A bar of 3/4 lasts about 1.406 seconds.

Is 128 BPM fast or slow?

Dance tempo (120 to 139 BPM). Typical ranges that include 128 BPM: Pop, Rock, Disco and nu disco, House, Techno, Trance. Half time is 64 BPM and double time is 256 BPM.